Instructions for a new washing machine

Generally the procedure is:

• Unpack your machine

• Check for damage

• If damaged, do not install, and contact your supplier

• Remove the protective screws from the back

• Put plastic plugs in their place

• Keep screws safe for later

• Place your new machine where you want it

• Close to a tap and water outlet, as well as a power source

• Adjust the washing machine’s feet to the floor

• No more than a 2° angle

• Attach water inlet hose to tap

• Screw onto the cold water inlet on the machine

• Connect the drain hose to a draining duct or under sink tap

• Make sure to remove any blanks from the hose first

• The drain hose should be raised 15cm from the ground

• Connect to the power

• Be sure to check the plug and socket are compatible